72271LA20PF
| Parameters | |
|---|---|
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 50MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Direction | Unidirectional |
| Density | 288 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
72271LA20PF Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.64 pins are used for operation.In order for FIFO design to operate, a maximum current of 75mA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.When the frequency is set to 50MHz , the system can maintain good accuracy.50MHz is the FIFO memory IC's maximum value for regular operation.
72271LA20PF Features
Frequency at most
72271LA20PF Applications
There are a lot of Integrated Device Technology (IDT) 72271LA20PF FIFOs Memory applications.
- Down-Hole Energy Drilling
- Programmable Logic Controller
- TVs
- High-speed graphics pixel buffer
- Digital buffering
- Test Equipment
- Video
- Portable Information Devices
- Tape controllers
- Computers
