72275L15TFI8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72275L15TFI8 Overview
LQFP is the package in which FIFO memory chip is contained.In this case, it is packaged in case number Tape & Reel .Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V , high efficiency is possible.64 terminations are contained in FIFO means.FIFO design has 64 operation pins.In order to operate FIFO design, a maximum current of 90mA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 64 pins on this board.A frequency of 66.7MHz is sufficient to maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .There are normally 5V power supplies attached to the component.This gadget can also generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72275L15TFI8 Features
FIFOs category
Frequency at most
72275L15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72275L15TFI8 FIFOs Memory applications.
- Medical Monitoring Device
- Seismic Data Collection at Extreme Temperatures
- Temporary storage elements
- Microprogramming
- Communications Systems
- Video
- Computer networks
- SPI Bus Flash Memory Device
- Network switching/routing
- Digital buffering
