72275L20PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72275L20PF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it in the Surface Mount way is recommended.Supply voltages of 5V are capable of achieving high efficiency.A total of 64 terminations are contained within FIFO means.64 pin is used for operation.There is a maximum current requirement of 90mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.As a result, it contains a total of 64 pins.When the frequency is set to 50MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .Components normally possess 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.
72275L20PF8 Features
FIFOs category
Frequency at most
72275L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72275L20PF8 FIFOs Memory applications.
- Extended product life cycle
- Battery Charger
- Temporary storage elements
- Controlled baseline
- Transistors
- Video time base correction
- Computers
- Fabrication Site
- Communications Systems
- Networking
