72275L20PFI8
| Parameters | |
|---|---|
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX18 |
72275L20PFI8 Overview
FIFO memory chip is contained in the TQFP package.It comes in a Tape & Reel package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 64 .FIFO design has 64 operation pins.FIFO design requires a maximum current of 90mA to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.85°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.Currently, it has 64 pins.A frequency of 50MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.
72275L20PFI8 Features
FIFOs category
Frequency at most
72275L20PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72275L20PFI8 FIFOs Memory applications.
- Smart Meter
- Buses
- Event Recorder
- SPD for DDR3 Memory Modules
- Test Equipment
- Networking
- Code converters
- Routers
- Computer networks
- SPI Bus Flash Memory Devices
