72275L20TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72275L20TF Overview
The LQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 64 terminations.64 pin is used for operation.In order to operate FIFO design, a maximum current of 90mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 4.5V V, may be required for operation.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 64 pins on this board.A frequency of 50MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 50MHz .Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH by using this FIFO memory.
72275L20TF Features
FIFOs category
Frequency at most
72275L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72275L20TF FIFOs Memory applications.
- Extended product life cycle
- Notebook
- Address mapping
- Multi-stage synchronizer
- Down-Hole Energy Drilling
- Cardiac Monitoring Device
- Microprogramming
- Data-acquisition systems
- High-speed disk
- Communications
