72275L20TFI
| Parameters | |
|---|---|
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX18 |
| Density | 576 kb |
72275L20TFI Overview
You can find FIFO memory chip in the LQFP package.Memory IC's recommended mounted way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .I found that it has 64 terminations in FIFO means.64 pin is used for operation.In order to operate FIFO design, a maximum current of 90mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.Keeping the temperature at -40°C degrees Celsius ensures its reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 64 pins on this board.A frequency of 50MHz is sufficient to maintain good accuracy.Regular operation has a FIFO memory's maximum value of 50MHz .Normally, 5V power supplies are owned by the component.The gadget can also generate a value of RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72275L20TFI Features
FIFOs category
Frequency at most
72275L20TFI Applications
There are a lot of Integrated Device Technology (IDT) 72275L20TFI FIFOs Memory applications.
- Optical memories
- Buses
- A/D output buffers
- Communications
- Computer networks
- Address mapping
- Extended product-change notification
- Test Equipment
- Smart Meter
- Extended product life cycle
