72281L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72281L10TF8 Overview
FIFO memory chip is included in the LQFP package.This FIFO memory chip is packaged as a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 64 .There are 64 pins for operation.FIFO design requires 80mA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 4.5V V, may be required for operation.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 64 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 100MHz .The memory logic's maximum value is 100MHz for regular operation.Components normally possess 5V power supplies.With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72281L10TF8 Features
FIFOs category
Frequency at most
72281L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72281L10TF8 FIFOs Memory applications.
- PC peripheral
- Buses
- Video Processing
- Consumer Systems
- HDD
- Seismic Data Collection at Extreme Temperatures
- Cardiac Monitoring Device
- Network switching/routing
- Disk Controllers
- Consumer
