72281L15PF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72281L15PF8 Overview
TQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 64 terminations.64 pin is used for operation.In order to operate it, it requires 80mA volts of current.A supply voltage of 5V is recommended for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.With a frequency of 66.7MHz , it maintains good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.There are normally 5V power supplies attached to the component.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.
72281L15PF8 Features
FIFOs category
Frequency at most
72281L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72281L15PF8 FIFOs Memory applications.
- Microprogramming
- Multi-stage synchronizer
- High-speed graphics pixel buffer
- Fabrication Site
- TVs
- GPS Offender Tracking
- Product traceability
- Consumer
- Switches
- Game Controller
