72281L20PFI8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2013 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72281L20PFI8 Overview
You will find FIFO memory chip in the TQFP package.There's a Tape & Reel on the package.Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.I found that it has 64 terminations in FIFO means.The operation pins are 64 pins.In order for FIFO design to operate, a maximum current of 80mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 64 pins are present on the FIFO memory IC.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.There are normally 5V power supplies attached to the component.This gadget can also generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72281L20PFI8 Features
FIFOs category
Frequency at most
72281L20PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72281L20PFI8 FIFOs Memory applications.
- Optical memories
- Tape controllers
- Network bridges
- Firmware loaders
- Game Consoles
- General Data Collection Applications at Low-Temperatures
- Extended product-change notification
- Test site
- Routers
- Portable Information Devices
