72285L10PFG
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 90mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
72285L10PFG Overview
You can find FIFO memory chip in package LQFP .The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.64 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 90mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 64 pins are attached to it.There is 100MHz FIFO memory IC's maximum value for regular operation.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72285L10PFG Features
FIFOs category
Frequency at most
72285L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72285L10PFG FIFOs Memory applications.
- Fabrication Site
- SPI Bus Flash Memory Devices
- Code converters
- Portable Information Devices
- Buses
- Medical Monitoring Device
- Controlled baseline
- Measurement Equipment
- Cardiac Monitoring Device
- Multi-stage synchronizer
