72285L10PFG8
| Parameters | |
|---|---|
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 90mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
72285L10PFG8 Overview
FIFO memory chip is included in the LQFP package.You'll find it packaged in the shape of a Tape & Reel .The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.A total of 64 terminations can be found in FIFO means.There are 64 pins on the operation pins.The maximum current required for its operation is 90mA .A 5V supply voltage will ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 64 pins are attached to it.During normal operation, the FIFO memory's maximum value is 100MHz .The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72285L10PFG8 Features
FIFOs category
Frequency at most
72285L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72285L10PFG8 FIFOs Memory applications.
- Programmable Logic Controller
- Network switching/routing
- Test site
- Smart Meter
- Address mapping
- Thermal Management for DDR3 Memory Modules
- Disk Controllers
- Network bridges
- Analog-to-digital converters
- Application that requires re-writable nonvolatile parameter memory
