72285L15PFI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72285L15PFI Overview
FIFO memory chip is included in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.A total of 64 terminations can be found in FIFO means.FIFO design has 64 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 90mA .A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.85°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 64 pins on this board.When the frequency is set to 66.7MHz , the system can maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.Components normally possess 5V power supplies.This gadget can also be used to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72285L15PFI Features
FIFOs category
Frequency at most
72285L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72285L15PFI FIFOs Memory applications.
- Battery Charger
- Computers
- Multimedia
- Application that requires re-writable nonvolatile parameter memory
- Data communications
- Look-up Tables
- Test Equipment
- General Data Collection Applications at Extreme High-Temperatures
- Video
- High-speed graphics pixel buffer
