72285L15PFI8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72285L15PFI8 Overview
FIFO memory chip is included in the TQFP package.This FIFO memory chip is packaged as a Tape & Reel .A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 64 terminations, which indicates that FIFO means is empty.FIFO design has 64 operation pins.In order to operate FIFO design, a maximum current of 90mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 64 pins in total.With a frequency of 66.7MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.
72285L15PFI8 Features
FIFOs category
Frequency at most
72285L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72285L15PFI8 FIFOs Memory applications.
- Transistors
- High-speed disk
- Alarm System
- SPI Bus Flash Memory Devices
- Analog-to-digital converters
- Consumer
- Multimedia
- Cardiac Monitoring Device
- General Data Collection Applications at Extreme High-Temperatures
- Communications
