72285L20TF
| Parameters | |
|---|---|
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 1.1 Mb |
72285L20TF Overview
You can find FIFO memory chip in package LQFP .Mounting it Surface Mount is recommended.An input voltage of 5V results in high efficiency.FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO design requires 90mA amps of current to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 64 pins in total.With a frequency of 50MHz , it maintains good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.
72285L20TF Features
FIFOs category
Frequency at most
72285L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72285L20TF FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- HDD
- Networking
- Rate buffers
- Switches
- Cardiac Monitoring Device
- Communications Systems
- Network bridges
- Measurement Equipment
- Optical memories
