Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Packaging |
Tape & Reel |
Published |
2013 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
100MHz |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
64 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
80mA |
Max Supply Current |
80mA |
Frequency (Max) |
100MHz |
Access Time |
6.5 ns |
Organization |
128KX9 |
Density |
1.1 Mb |
Standby Current-Max |
0.02A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
Output Enable |
YES |
Cycle Time |
10 ns |
Height Seated (Max) |
1.6mm |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72291L10PF8 Overview
The TQFP package contains FIFO memory chip.In terms of packaging, it comes in Tape & Reel cases.Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.64 pins are the operation pins.FIFO design requires 80mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 64 pins on this board.When the frequency is set to 100MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .There are normally 5V power supplies attached to the component.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.
72291L10PF8 Features
FIFOs category
Frequency at most
72291L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72291L10PF8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Communications
- Computers
- Signal processing
- Event Recorder
- General Data Collection Applications at Extreme High-Temperatures
- Notebook
- Cardiac Monitoring Device
- HDD
- Multimedia