723622L12PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83.3MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 256X36 |
| Density | 18 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723622L12PF8 Overview
TQFP is a package that contains FIFO memory chip.You'll find it packaged in the shape of a Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.Supply voltages of 5V are capable of achieving high efficiency.A total of 120 terminations can be found in FIFO means.There are 120 pins on the operation pins.The maximum current required for its operation is 400mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .In this part, the memory type is BI-DIRECTIONAL FIFO .Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 120 pins in total.In the presence of a 83.3MHz frequency, it can maintain good accuracy.83.3MHz is the FIFO memory IC's maximum value for regular operation.The component normally owns 5V power supplies.It is also possible to generate MAILBOX by using this FIFO memory.
723622L12PF8 Features
FIFOs category
Frequency at most
723622L12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723622L12PF8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Network bridges
- Portable Information Devices
- Video Processing
- Notebook
- Fabrication Site
- Signal processing
- Computer Systems
- Networking
- Application that requires re-writable nonvolatile parameter memory
