723622L15PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 120 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
723622L15PFG8 Overview
FIFO memory chip can be found in the LQFP package.In terms of packaging, it comes in Tape & Reel (TR) cases.A Surface Mount mounting method is recommended.These are the 120 pins for operation.Its maximum operating current is 400mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.During regular operation, 66.7MHz is the FIFO memory's maximum value.
723622L15PFG8 Features
Frequency at most
723622L15PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 723622L15PFG8 FIFOs Memory applications.
- Extended product-change notification
- SPI Bus Flash Memory Device
- Address mapping
- SPD for DDR3 Memory Modules
- Data-acquisition systems
- A/D output buffers
- Communications
- Computer networks
- Video Processing
- Data communications
