Parameters |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
400mA |
Max Supply Current |
400mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
256X36 |
Density |
9 kb |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
36b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Bidirectional |
Retransmit Capability |
No |
FWFT Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
20mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
128 |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
128 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
MAIL BOX |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Frequency |
66.7MHz |
Pin Count |
128 |
723623L15PF Overview
FIFO memory chip can be found in the TQFP package.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .I found that it has 128 terminations in FIFO means.128 pins are the operation pins.Its maximum operating current is 400mA .A voltage of 5V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 128 pins on it.When the frequency is set to 66.7MHz , the system can maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.Using this gadget, MAIL BOX can also be generated.
723623L15PF Features
FIFOs category
Frequency at most
723623L15PF Applications
There are a lot of Integrated Device Technology (IDT) 723623L15PF FIFOs Memory applications.
- MP3 Interface for Automobile
- Extended product-change notification
- Signal processing
- High-speed graphics pixel buffer
- Game Controller
- Buses
- Video Processing
- Analog-to-digital converters
- Code converters
- Down-Hole Energy Drilling