723624L12PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 256X36 |
| Density | 18 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723624L12PF Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.A supply voltage of 5V allows for high efficiency.I found that it has 128 terminations in FIFO means.Operation pins are 128 .The maximum current required for its operation is 400mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is BI-DIRECTIONAL FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.As a result, it contains a total of 128 pins.It is capable of maintaining good accuracy with a frequency of 83MHz .It is recommended that the FIFO memory's maximum value be set to 83MHz .Normaly, the component is powered by 5V power supplies.It is also possible to generate MAIL BOX with the use of this FIFO memory.
723624L12PF Features
FIFOs category
Frequency at most
723624L12PF Applications
There are a lot of Integrated Device Technology (IDT) 723624L12PF FIFOs Memory applications.
- Transistors
- Telecommunication
- Video
- Test site
- Desktop Computers
- Video Processing
- Data communications
- Signal processing
- Code converters
- GPS Offender Tracking
