723626L12PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 256X36 |
| Density | 18 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723626L12PF Overview
FIFO memory chip is included in the TQFP package.Surface Mount is recommended as the mounting method.High efficiency is possible with a supply voltage of 5V .FIFO means contains 128 terminations.There are 128 pins on the operation pins.In order for FIFO design to operate, a maximum current of 400mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.The IC of the part is BI-DIRECTIONAL FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.As a result, it contains a total of 128 pins.When the frequency is set to 83MHz , the system can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 83MHz .Normaly, the component is powered by 5V power supplies.Additionally, this FIFO memory can be used to generate MAILBOX .
723626L12PF Features
FIFOs category
Frequency at most
723626L12PF Applications
There are a lot of Integrated Device Technology (IDT) 723626L12PF FIFOs Memory applications.
- Notebook
- Digital buffering
- HDD
- PC peripheral
- Rate buffers
- Queues for communication systems
- GPS Offender Tracking
- Industrial Systems
- Disk Controllers
- Address mapping
