723626L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X36 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
723626L15PF8 Overview
You can find FIFO memory chip in package TQFP .Tape & Reel case is used for packaging.Mounting it Surface Mount is recommended.With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains a total of 128 terminations.FIFO design has 128 operation pins.FIFO design requires 400mA amps of current to operate.A voltage of 5V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.Currently, it has 128 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.It is normal for the component to own 5V power supplies.Additionally, this FIFO memory can be used to generate MAILBOX .
723626L15PF8 Features
FIFOs category
Frequency at most
723626L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723626L15PF8 FIFOs Memory applications.
- Extended product life cycle
- SPI Bus Flash Memory Devices
- Character generators
- Routers
- Test site
- Consumer Systems
- Firmware loaders
- General Data Collection Applications at Extreme High-Temperatures
- Address mapping
- Event Recorder
