723631L20PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| Part Status | Discontinued |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 50MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Direction | Bidirectional |
| Density | 18 kb |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723631L20PF Overview
You can find FIFO memory chip in the TQFP package.Mounting it in the Surface Mount way is recommended.120 pin is used for operation.FIFO design requires 400μA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.A frequency of 50MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 50MHz .
723631L20PF Features
Frequency at most
723631L20PF Applications
There are a lot of Integrated Device Technology (IDT) 723631L20PF FIFOs Memory applications.
- Programmable Logic Controller
- Cardiac Monitoring Device
- Data
- Multimedia
- Emulators
- Measurement Equipment
- Buses
- Computers
- Event Recorder
- Extended product life cycle
