723631L20PFI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723631L20PFI Overview
FIFO memory chip can be found in the TQFP package.Mounting it in Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 120 terminations.120 pins are used for operation.FIFO requires a minimum of 400μA current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.A total of 120 pins are present on the FIFO memory IC.When the frequency is set to 50MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 50MHz .It is normal for the component to own 5V power supplies.Additionally, this FIFO memory can be used to generate MAIL BOX; RETRANSMIT .
723631L20PFI Features
FIFOs category
Frequency at most
723631L20PFI Applications
There are a lot of Integrated Device Technology (IDT) 723631L20PFI FIFOs Memory applications.
- Data communications
- Test site
- Controlled baseline
- Character generators
- Multi-stage synchronizer
- Data
- High-speed graphics pixel buffer
- High-speed disk
- Magnetic memories
- Computer Systems
