Parameters |
Mount |
Surface Mount |
Package / Case |
PQFP |
Number of Pins |
132 |
Published |
2009 |
Part Status |
Discontinued |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
50MHz |
Operating Supply Voltage |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
400μA |
Max Supply Current |
400μA |
Frequency (Max) |
50MHz |
Access Time |
13 ns |
Data Bus Width |
36b |
Direction |
Bidirectional |
Density |
18 kb |
Sync/Async |
Synchronous |
Word Size |
36b |
Bus Directional |
Bidirectional |
Retransmit Capability |
Yes |
FWFT Support |
Yes |
Programmable Flags Support |
Yes |
Length |
24.13mm |
Width |
24.13mm |
Thickness |
3.55mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
723631L20PQF Overview
PQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.As far as the operation pins are concerned, they are 132 pins.In order to operate FIFO design, a maximum current of 400μA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A frequency of 50MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
723631L20PQF Features
Frequency at most
723631L20PQF Applications
There are a lot of Integrated Device Technology (IDT) 723631L20PQF FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Programmable Logic Controller
- Network switching/routing
- Microprogramming
- Down-Hole Energy Drilling
- HDD
- Video Processing
- Multi-stage synchronizer
- Disk Controllers
- Video time base correction