723632L12PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83.3MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 36 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723632L12PF8 Overview
You will find FIFO memory chip in the TQFP package.In this case, it is packaged in case number Tape & Reel .Surface Mount is recommended as the mounting method.With a supply voltage of 5V volts, high efficiency is possible.The number of terminations in FIFO means is 120 .As far as the operation pins are concerned, they are 120 pins.In order for FIFO design to operate, a maximum current of 400mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is BI-DIRECTIONAL FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.It has a total of 120 pins on it.In the presence of a 83.3MHz frequency, it can maintain good accuracy.Normally, the FIFO memory's maximum value is 83.3MHz .In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory can be used to generate MAILBOX .
723632L12PF8 Features
FIFOs category
Frequency at most
723632L12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723632L12PF8 FIFOs Memory applications.
- Wireless
- Analog-to-digital converters
- IP Radio
- Rate buffers
- Product traceability
- Address mapping
- Controlled baseline
- Measurement Equipment
- TVs
- Network switching/routing
