723632L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723632L15PF Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .In FIFO means, there are 120 terminations.120 pin is used for operation.There is a maximum current requirement of 400mA for its operation.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.ICs of type BI-DIRECTIONAL FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 120 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.The component normally owns 5V power supplies.It is also possible to generate MAILBOX by using this FIFO memory.
723632L15PF Features
FIFOs category
Frequency at most
723632L15PF Applications
There are a lot of Integrated Device Technology (IDT) 723632L15PF FIFOs Memory applications.
- Firmware loaders
- SPD for DDR3 Memory Modules
- Data-acquisition systems
- Transistors
- Video time base correction
- Analog-to-digital converters
- Game Controller
- Consumer
- Desktop Computers
- General Data Collection Applications at Extreme High-Temperatures
