723632L15PQF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24.13mm |
| Width | 24.13mm |
| Thickness | 3.55mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723632L15PQF Overview
FIFO memory chip is contained in the PQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 5V .The number of terminations in FIFO means is 132 .The operation pins are 132 pins.FIFO design requires 400mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.A BI-DIRECTIONAL FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.As a result, it contains a total of 132 pins.It maintains good accuracy at a 66.7MHz frequency.During regular operation, the FIFO memory's maximum value is 66.7MHz .A component normally has 5V power supplies attached to it.It is also possible to generate MAILBOX by using this FIFO memory.
723632L15PQF Features
FIFOs category
Frequency at most
723632L15PQF Applications
There are a lot of Integrated Device Technology (IDT) 723632L15PQF FIFOs Memory applications.
- Computer Systems
- Video Processing
- IP Radio
- Measurement Equipment
- Buses
- Firmware loaders
- Address mapping
- Microprogramming
- Battery Charger
- Optical memories
