723633L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X36 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
723633L15PF Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 128 terminations.128 pins are used for operation.FIFO design requires a maximum current of 400mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC has a total of 128 pins.With a frequency of 66.7MHz , it maintains good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .There are normally 5V power supplies attached to the component.It is also possible to generate MAIL BOX by using this FIFO memory.
723633L15PF Features
FIFOs category
Frequency at most
723633L15PF Applications
There are a lot of Integrated Device Technology (IDT) 723633L15PF FIFOs Memory applications.
- Cameras
- Consumer Systems
- Video time base correction
- Game Consoles
- Portable Information Devices
- Temporary storage elements
- High-speed disk
- Communications
- SPI Bus Flash Memory Devices
- Extended product-change notification
