723634L12PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 36 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723634L12PF Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.I found that it has 128 terminations in FIFO means.There are 128 pins for operation.FIFO design requires 400mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 128 pins are attached to it.A frequency of 83MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 83MHz .In normal circumstances, the component has 5V power supplies.The gadget can also generate a value of MAIL BOX .
723634L12PF Features
FIFOs category
Frequency at most
723634L12PF Applications
There are a lot of Integrated Device Technology (IDT) 723634L12PF FIFOs Memory applications.
- Telecommunication
- Network switching/routing
- Thermal Management for DDR3 Memory Modules
- Analog-to-digital converters
- Computer Systems
- High-speed disk
- Signal processing
- MP3 Interface for Automobile
- Alarm System
- Medical Monitoring Device
