723634L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X36 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
723634L15PF8 Overview
You can find FIFO memory chip in package TQFP .Tape & Reel case is used for packaging.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 128 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 128 pins.In order for FIFO design to operate, a maximum current of 400mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .The IC of the part is of the type BI-DIRECTIONAL FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 128 pins on it.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.The component normally owns 5V power supplies.It is also possible to generate MAIL BOX using this FIFO memory.
723634L15PF8 Features
FIFOs category
Frequency at most
723634L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723634L15PF8 FIFOs Memory applications.
- Alarm System
- Look-up Tables
- Buses
- Wireless
- High-speed graphics pixel buffer
- Transistors
- Data-acquisition systems
- Notebook
- Disk Controllers
- SPD for DDR3 Memory Modules
