723636L12PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 36 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723636L12PF Overview
FIFO memory chip is included in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.A total of 128 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 128 pins.FIFO requires a minimum of 400mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .In this part, the memory type is BI-DIRECTIONAL FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 128 pins on this board.With a frequency of 83MHz , it exhibits good accuracy.The memory logic's maximum value is 83MHz for regular operation.It is normal for the component to own 5V power supplies.Additionally, this FIFO memory is capable of generating MAILBOX as well.
723636L12PF Features
FIFOs category
Frequency at most
723636L12PF Applications
There are a lot of Integrated Device Technology (IDT) 723636L12PF FIFOs Memory applications.
- Multi-stage synchronizer
- Tape controllers
- Measurement Equipment
- MP3 Interface for Automobile
- Game Controller
- Portable Information Devices
- Smart Meter
- Laser Receiver System
- SPI Bus Flash Memory Device
- Network switching/routing
