723636L12PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 512X36 |
| Density | 36 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723636L12PF8 Overview
You will find FIFO memory chip in the TQFP package.Tape & Reel case is used for packaging.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 128 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 128 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 400mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .The IC of the part is BI-DIRECTIONAL FIFO memory type.Low supply voltages, such as 4.5V V, may be required for operation.An input voltage of 5.5V V is the maximum that FIFO memory can handle.It consists of a total of 128 pins.When the frequency is set to 83MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 83MHz .Normaly, the component is powered by 5V power supplies.Additionally, MAILBOX can be generated with this FIFO memory.
723636L12PF8 Features
FIFOs category
Frequency at most
723636L12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723636L12PF8 FIFOs Memory applications.
- Programmable Logic Controller
- Network switching/routing
- A/D output buffers
- Test site
- PC peripheral
- One assembly
- Desktop Computers
- Medical Monitoring Device
- Smart Meter
- Look-up Tables
