723636L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X36 |
| Output Characteristics | 3-STATE |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Triple-Bus |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
723636L15PF8 Overview
You can find FIFO memory chip in package TQFP .There is a case Tape & Reel in which it is packaged.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 5V .I found that it has 128 terminations in FIFO means.128 pin is used for operation.Its maximum operating current is 400mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.A BI-DIRECTIONAL FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 128 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .There are normally 5V power supplies attached to the component.Using this gadget, MAILBOX can also be generated.
723636L15PF8 Features
FIFOs category
Frequency at most
723636L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723636L15PF8 FIFOs Memory applications.
- Look-up Tables
- Video time base correction
- Measurement Equipment
- MP3 Interface for Automobile
- Down-Hole Energy Drilling
- Network bridges
- TVs
- Consumer
- IP Radio
- General Data Collection Applications at Extreme High-Temperatures
