723641L20PFI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Organization | 1KX36 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723641L20PFI Overview
You will find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 5V .FIFO means contains a total of 120 terminations.In the case of the operation pins, they are 120 pins.The maximum current required for its operation is 400μA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.Keeping the temperature at -40°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC has a total of 120 pins.When the frequency is set to 50MHz , the system can maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.Components normally possess 5V power supplies.It is also possible to generate MAIL BOX; RETRANSMIT by using this FIFO memory.
723641L20PFI Features
FIFOs category
Frequency at most
723641L20PFI Applications
There are a lot of Integrated Device Technology (IDT) 723641L20PFI FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Computers
- Test site
- Network switching/routing
- Disk Controllers
- Battery Charger
- Cameras
- IP Radio
- Down-Hole Energy Drilling
- A/D output buffers
