723641L20PFI8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Organization | 1KX36 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723641L20PFI8 Overview
You can find FIFO memory chip in package TQFP .In terms of packaging, it comes in Tape & Reel cases.It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 5V .In FIFO means, there are 120 terminations.120 pins are the operation pins.There is a maximum current requirement of 400μA for its operation.A supply voltage of 5V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 120 pins in total.It maintains good accuracy at a 50MHz frequency.50MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.It is also possible to generate MAIL BOX; RETRANSMIT by using this FIFO memory.
723641L20PFI8 Features
FIFOs category
Frequency at most
723641L20PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 723641L20PFI8 FIFOs Memory applications.
- Controlled baseline
- IP Camera Buffer
- Cameras
- Game Controller
- High-speed graphics pixel buffer
- Microprogramming
- PC peripheral
- Data communications
- Networking
- Consumer
