723644L12PF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83MHz |
| Access Time | 8 ns |
| Data Bus Width | 36b |
| Organization | 1KX36 |
| Density | 72 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723644L12PF8 Overview
The TQFP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.The recommended mounting method for this FIFO products is Surface Mount .High efficiency is possible with a supply voltage of 5V .The number of terminations in FIFO means is 128 .There are 128 pins for operation.FIFO requires a minimum of 400mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.There is a memory type BI-DIRECTIONAL FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It consists of a total of 128 pins.It maintains good accuracy at a 83MHz frequency.A FIFO memory's maximum value of 83MHz can be used for regular operation.It is normal for a component to be equipped with 5V power supplies.It is also possible to generate MAIL BOX with the use of this FIFO memory.
723644L12PF8 Features
FIFOs category
Frequency at most
723644L12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723644L12PF8 FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Cameras
- Communications
- Networking
- Controlled baseline
- SPI Bus Flash Memory Device
- Consumer Systems
- Network bridges
- Queues for communication systems
- SPD for DDR3 Memory Modules
