723644L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX36 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
723644L15PF Overview
TQFP is the package in which FIFO memory chip is contained.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.I found that it has 128 terminations in FIFO means.128 pins are the operation pins.FIFO requires a minimum of 400mA current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.It has a BI-DIRECTIONAL FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 128 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .Normally, the component owns 5V power supplies.With the help of this FIFO memory, MAIL BOX can also be generated.
723644L15PF Features
FIFOs category
Frequency at most
723644L15PF Applications
There are a lot of Integrated Device Technology (IDT) 723644L15PF FIFOs Memory applications.
- Multi-stage synchronizer
- Analog-to-digital converters
- Extended product-change notification
- Fabrication Site
- Data communications
- Alarm System
- Emulators
- Signal processing
- Cardiac Monitoring Device
- Computers
