723651L20PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 120 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Organization | 2KX36 |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
723651L20PFGI Overview
TQFP is the package in which FIFO memory chip is contained.In addition to storing applications and data, the FIFO chips have a memory of 9kB .It is recommended that memory IC be mounted in the Surface Mount direction.With a supply voltage of 5V volts, high efficiency is possible.A total of 120 terminations are contained within FIFO means.There are 120 pins for operation.There is a maximum current requirement of 400μA for its operation.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 120 pins in total.Regular operation has a FIFO memory's maximum value of 50MHz .Normally, 5V power supplies are owned by the component.With the help of this FIFO memory, MAIL BOX; RETRANSMIT can also be generated.By using 1 circuits, FIFO memory chip achieves enhanced flexibility.
723651L20PFGI Features
9kB memory size
FIFOs category
Frequency at most
723651L20PFGI Applications
There are a lot of Integrated Device Technology (IDT) 723651L20PFGI FIFOs Memory applications.
- Data
- Signal processing
- Communications
- Laser Receiver System
- Test Equipment
- Optical memories
- Emulators
- Cameras
- Microprogramming
- Digital buffering
