723651L20PQF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Frequency (Max) | 50MHz |
| Access Time | 13 ns |
| Data Bus Width | 36b |
| Organization | 2KX36 |
| Density | 72 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| Thickness | 3.55mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723651L20PQF Overview
You will find FIFO memory chip in the PQFP package.Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.I found that it has 132 terminations in FIFO means.There are 132 pins on the operation pins.The maximum current required for its operation is 400μA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It consists of a total of 132 pins.In the presence of a 50MHz frequency, it can maintain good accuracy.50MHz is the FIFO memory IC's maximum value for regular operation.It is normal for the component to own 5V power supplies.It is also possible to generate MAIL BOX; RETRANSMIT by using this FIFO memory.
723651L20PQF Features
FIFOs category
Frequency at most
723651L20PQF Applications
There are a lot of Integrated Device Technology (IDT) 723651L20PQF FIFOs Memory applications.
- Portable Information Devices
- TVs
- Tape controllers
- Look-up Tables
- Multi-stage synchronizer
- Test site
- Address mapping
- Emulators
- Extended product life cycle
- SPD for DDR3 Memory Modules
