723672L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Access Time | 10 ns |
| Organization | 8KX36 |
| Density | 576 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
723672L15PF Overview
You will find FIFO memory chip in the TQFP package.Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.120 terminations are contained in FIFO means.FIFO design has 120 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 400mA .A voltage of 5V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .This part has a memory type of BI-DIRECTIONAL FIFO .Low supply voltages, such as 4.5V V, may be required for operation.The memory logic's maximum supply voltage is 5.5V volts.It has a total of 120 pins on it.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.Normally, the component owns 5V power supplies.Additionally, MAIL BOX can be generated with this FIFO memory.
723672L15PF Features
FIFOs category
723672L15PF Applications
There are a lot of Integrated Device Technology (IDT) 723672L15PF FIFOs Memory applications.
- Computer Systems
- Cardiac Monitoring Device
- Tape controllers
- Address mapping
- Desktop Computers
- Firmware loaders
- Fabrication Site
- SPD for DDR3 Memory Modules
- Signal processing
- Measurement Equipment
