723673L12PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83.3MHz |
| Access Time | 8 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
723673L12PF Overview
This package is included in TQFP .The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 128 .FIFO design has 128 operation pins.In order to operate FIFO design, a maximum current of 400mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 128 pins on this board.With a frequency of 83.3MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 83.3MHz .The component normally owns 5V power supplies.The gadget can also generate a value of MAIL BOX .
723673L12PF Features
FIFOs category
Frequency at most
723673L12PF Applications
There are a lot of Integrated Device Technology (IDT) 723673L12PF FIFOs Memory applications.
- One assembly
- GPS Offender Tracking
- Controlled baseline
- Signal processing
- Data communications
- Extended product life cycle
- Routers
- Queues for communication systems
- Address mapping
- Character generators
