723673L12PF8
| Parameters | |
|---|---|
| Additional Feature | MAIL BOX |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 83.3MHz |
| Access Time | 8 ns |
| Organization | 8KX36 |
| Density | 288 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 12 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
723673L12PF8 Overview
TQFP is the package in which FIFO memory chip is contained.There's a Tape & Reel on the package.Mounting it in Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.In FIFO means, there are 128 terminations.There are 128 pins on the operation pins.FIFO design requires a maximum current of 400mA to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.It consists of a total of 128 pins.A frequency of 83.3MHz is capable of maintaining good accuracy.There is 83.3MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate MAIL BOX .
723673L12PF8 Features
FIFOs category
Frequency at most
723673L12PF8 Applications
There are a lot of Integrated Device Technology (IDT) 723673L12PF8 FIFOs Memory applications.
- Computers
- Analog-to-digital converters
- High-speed disk
- Seismic Data Collection at Extreme Temperatures
- Video Processing
- Down-Hole Energy Drilling
- Routers
- Test Equipment
- Product traceability
- Controlled baseline
