72401L10DB
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2012 |
| Part Status | Discontinued |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 45mA |
| Max Supply Current | 45mA |
| Access Time | 55 ns |
| Density | 256 b |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Length | 20mm |
| Width | 7.62mm |
| Thickness | 3.43mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72401L10DB Overview
You can find FIFO memory chip in package CDIP .This FIFO memory chip is packaged as a Bulk .Through Hole is recommended as the mounting method.There are 16 pins on the operation pins.There is a maximum current requirement of 45mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.As a result of having a maximum operating temperature of 125°C degrees Celsius, the unit is capable of exhibiting stable operation.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.
72401L10DB Features
72401L10DB Applications
There are a lot of Integrated Device Technology (IDT) 72401L10DB FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- IP Camera Buffer
- Product traceability
- Fabrication Site
- Network switching/routing
- SPI Bus Flash Memory Devices
- SPI Bus Flash Memory Device
- Multimedia
- Rate buffers
- TVs
