72401L10P
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 32B |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 10MHz |
| Access Time | 55 ns |
| Data Bus Width | 4b |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
72401L10P Overview
The PDIP package contains FIFO memory chip.A memory of 32B is available for storing applications and data on this FIFO chip.Through Hole is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 16 terminations, which indicates that FIFO means is empty.FIFO design has 16 operation pins.FIFO design requires 35mA amps of current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC has a total of 16 pins.10MHz is the FIFO memory IC's maximum value for regular operation.The component normally owns 5V power supplies.It is also possible to generate FALL THRU 65NS by using this FIFO memory.By using 1 circuitry, FIFO memory chip has enhanced flexibility.
72401L10P Features
32B memory size
FIFOs category
Frequency at most
72401L10P Applications
There are a lot of Integrated Device Technology (IDT) 72401L10P FIFOs Memory applications.
- GPS Offender Tracking
- Video time base correction
- Networking
- Computer Systems
- Thermal Management for DDR3 Memory Modules
- Data-acquisition systems
- Temporary storage elements
- Test site
- Network switching/routing
- SPI Bus Flash Memory Device
