72401L15P
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 65NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 15MHz |
| Access Time | 40 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 66.67 ns |
| Height Seated (Max) | 4.191mm |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72401L15P Overview
You can find FIFO memory chip in package PDIP .In terms of packaging, it comes in Bulk cases.It is pointing in the direction of Through Hole .A supply voltage of 5V allows for high efficiency.I found that it has 16 terminations in FIFO means.There are 16 pins for operation.In order to operate FIFO design, a maximum current of 35mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.As a result, it contains a total of 16 pins.There are normally 5V power supplies attached to the component.It is also possible to generate FALL THRU 65NS with the use of this FIFO memory.The FIFO memory IC's clock runs at a frequency of 15MHz .
72401L15P Features
FIFOs category
Clock frequency of 15MHz
72401L15P Applications
There are a lot of Integrated Device Technology (IDT) 72401L15P FIFOs Memory applications.
- Multi-stage synchronizer
- Communications
- Multimedia
- Emulators
- Extended product-change notification
- High-speed disk
- Temporary storage elements
- Data
- Cameras
- Fabrication Site
