72401L25SO8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 40NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 25MHz |
| Access Time | 34 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72401L25SO8 Overview
FIFO memory chip is included in the SOIC package.You'll find it packaged in the shape of a Tape & Reel .It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 16 terminations.16 pins are the operation pins.FIFO design requires 35mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 16 pins on this board.Normally, the component owns 5V power supplies.With the help of this FIFO memory, FALL THRU 40NS can also be generated.A clock on the FIFO memory IC runs at a frequency of 25MHz .
72401L25SO8 Features
FIFOs category
Clock frequency of 25MHz
72401L25SO8 Applications
There are a lot of Integrated Device Technology (IDT) 72401L25SO8 FIFOs Memory applications.
- IP Radio
- Character generators
- Thermal Management for DDR3 Memory Modules
- Microprogramming
- Multimedia
- Firmware loaders
- Cameras
- Queues for communication systems
- PC peripheral
- Consumer Systems
