72401L35P
| Parameters | |
|---|---|
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 35MHz |
| Access Time | 20 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 28.57 ns |
| Height Seated (Max) | 4.191mm |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 34NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
72401L35P Overview
PDIP is the package in which FIFO memory chip is contained.It comes in a Bulk package.It is recommended that memory IC be mounted in the Through Hole direction.It is possible to achieve high efficiency with a supply voltage of 5V .The number of terminations in FIFO means is 16 .16 pins are used for operation.The maximum current required for its operation is 35mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It has a total of 16 pins on it.Normally, 5V power supplies are owned by the component.It is also possible to generate FALL THRU 34NS by using this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 35MHz .
72401L35P Features
FIFOs category
Clock frequency of 35MHz
72401L35P Applications
There are a lot of Integrated Device Technology (IDT) 72401L35P FIFOs Memory applications.
- Transistors
- Controlled baseline
- Portable Information Devices
- Consumer Systems
- Extended product life cycle
- Routers
- Magnetic memories
- Laser Receiver System
- Video
- Firmware loaders
