72401L35SO8
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 35MHz |
| Access Time | 20 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 28.57 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 34NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
72401L35SO8 Overview
FIFO memory chip is contained in the SOIC package.There is a case Tape & Reel in which it is packaged.Surface Mount is memory IC's recommended mounting method.An input voltage of 5V results in high efficiency.As a result of this, FIFO means contains 16 terminations.In the case of the operation pins, they are 16 pins.In order to operate FIFO design, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC is equipped with a total of 16 pins.Normaly, the component is powered by 5V power supplies.It is also possible to generate FALL THRU 34NS with the use of this FIFO memory.FIFO memory ICs run at a frequency of 35MHz .
72401L35SO8 Features
FIFOs category
Clock frequency of 35MHz
72401L35SO8 Applications
There are a lot of Integrated Device Technology (IDT) 72401L35SO8 FIFOs Memory applications.
- Test Equipment
- Emulators
- Measurement Equipment
- Fabrication Site
- Tape controllers
- Smart Meter
- Data communications
- Game Controller
- Computer networks
- Network switching/routing
