72401L45P
| Parameters | |
|---|---|
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Clock Frequency | 45MHz |
| Access Time | 19 ns |
| Organization | 64X4 |
| Density | 256 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 22.22 ns |
| Height Seated (Max) | 4.191mm |
| Length | 19mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 30NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
72401L45P Overview
This package is included in DIP .A Through Hole mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 16 terminations.16 pin is used for operation.In order for FIFO design to operate, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.Currently, it has 16 pins.It is normal for a component to be equipped with 5V power supplies.Additionally, FALL THRU 30NS can be generated with this FIFO memory.There is 45MHz frequency set for the clock of the FIFO memory IC.
72401L45P Features
FIFOs category
Clock frequency of 45MHz
72401L45P Applications
There are a lot of Integrated Device Technology (IDT) 72401L45P FIFOs Memory applications.
- Data
- Controlled baseline
- General Data Collection Applications at Low-Temperatures
- Telecommunication
- Video
- Optical memories
- Microprogramming
- Signal processing
- SPD for DDR3 Memory Modules
- Networking
