72401L45SO
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FALL THRU 30NS |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Clock Frequency | 45MHz |
| Access Time | 19 ns |
| Organization | 64X4 |
| Density | 256 b |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 4b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | NO |
| Cycle Time | 22.22 ns |
| Height Seated (Max) | 2.65mm |
| Length | 10.4mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72401L45SO Overview
You will find FIFO memory chip in the SOIC package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 16 terminations.16 pin is used for operation.FIFO requires a minimum of 35mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 16 pins.The component normally owns 5V power supplies.With the help of this FIFO memory, FALL THRU 30NS can also be generated.The FIFO memory IC is controlled by a clock with a frequency of 45MHz .
72401L45SO Features
FIFOs category
Clock frequency of 45MHz
72401L45SO Applications
There are a lot of Integrated Device Technology (IDT) 72401L45SO FIFOs Memory applications.
- SPI Bus Flash Memory Device
- High-speed disk
- Smart Meter
- Desktop Computers
- SPD for DDR3 Memory Modules
- Industrial Systems
- Game Controller
- Code converters
- Product traceability
- HDD
